Hotán Harmony European Oak

Hotán® Harmony by LosánNL brings together European expertise in the finest veneers, adding an element of technical performance by reducing the noise in a room by up to 50%. These acoustic panels are delivered in pre-built modules, making them easy to install in any wall or ceiling application.

The performance, beauty and versatility of Harmony makes it the perfect solution for:

• Residential
• Restaurants and Cafés
• Office interiors

Hotán® Harmony Ash A Grade Rift Sliced Slip Matched LosánNL Veneered Panel

With a bright white veneer and pronounced grain, Ash is providing a beautiful contrast in colour when combined with black colour-through MDF to create a clean linear aesthetic. Harmony’s acoustic performance is enhanced with a black PET Polyester non-woven fabric, made from recycled water bottles, which acts as the perfect back drop for any modern environment.

9 mm black PET Polyester nonwoven fabric on which 27 pieces of 11 mm thick strips of real wood veneered colour through black MDF are mounted. The strips are spaced 13 mm apart.

Available Veneer Species

• European Oak
• Ash
• American Walnut
• Smoked European Oak
• Other wood species available on special order request

FSC Mixed Credit Available Upon Request

TSCA Title V1 Standard

Properties of real wood veneer:

Real wood veneer can vary in colour, grain structure and appearance from batch to batch.

Grade: A

• Preferred where excellent appearance is very important, as in cabinets and furniture
• The veneer is generally composed entirely of heartwood or sapwood unless specified for natural or determined by the species or cut
• Veneer is matched for both grain pattern and colour
• Minor infrequent burls, pin knots and inconspicuous small patches are allowed
• Frequency of the defects depends on the species

Cut: Rift

Rift cut veneer is desirable when straight grain material is required without prominent fleck (as is found in quarter cut Oak).

Matching: Slip

Adjacent sheets of veneer are placed side by side, in their natural order, without being turned. The result is a uniform look.

Installation

Panels can be used on ceilings as well as walls. It is recommended to mount the panels on 45 mm thick joists with a mutual distance of max. 600 mm. However, the panels can also be mounted directly to the wall. The screws are placed between the strips through the non-woven fabric. For fastening, a minimum of 15 flat head screws should be used per panel.

Acoustical Properties

Designed to reduce noise by up to 50% in the room they are installed in.